detector switches/ese21 design and speci? cations are each subject to change without notice. ask factory for the current technical speci? cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. e 1 s 2 e 3456789 21 product code type design no. 2nv detector switches type: ese21 features external dimensions : 3.4 mm 3.8 mm, height 2.3 mm light operating force re? ow soldering explanation of part numbers speci? cations rating 50 a 3 vdc to 10 ma 5 vdc (resistive load) contact resi stance 500 m max. insulation resistance 100 m min. (100 vdc) dielectric withstanding vo ltage 100 vac for 1 minute operating force 300 mn max. mounting height 2.3 mm poles and throws 1-pole 1-throw full travel (pus hing distance) ? n.o : height=3.8 mm 2.3 mm (1.5 mm) ? n.c : height=3.6 mm 2.3 mm (1.3 mm) ? n.o : height=4.8 mm 3.3 mm (1.5 mm) op er at in g li fe 5 0000 cycles min. temp erature range 10 c to +60 c heat resistance +80 ? for 96 hours low temperature resistance 25 c for 96 hours humidity resistance +4 0 c 90 % to 95 % rh for 96 hours minimum quantity/packing un it 2000 pcs. embossed taping (reel pack) quantity/carto n12 000 pcs. recommended ap pli ca tions detection of media in portable electronic equipment detection of ? aps (of folded body) for cellular phones jan. 2008
detector switches/ese21 design and speci? cations are each subject to change without notice. ask factory for the current technical speci? cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. full travel on starting position boss pwb mounting hole for reference (ese2121bt) view from a pwb land pattern for reference (ese2121at) view from a (5.4) 3.4 0.1 1.83 0.3 4-0.3 1.5 3.8 1.0 3.4 1.6 1.0 1.0 a 2.3 h 0 h 2.1 2.3 0.3 c0.1 1.20 0.05 0.8 (r0.5 ) 0.7 1.2 3.46 1.2 0.7 1.5 0.7 1.2 3.46 1.2 0.7 1.5 1.3 2.0 2.0 16.4 380.0 2.0 end top 16.0 0.3 1.75 0.1 7.5 0.1 p=8.0 0.1 4.0 0.1 2.0 0.1 1.5 +0.1 0 13.5 carrier tape cover tape drawing direction pilot holes leading portion 400 mm min. packed portion (100 mm min.) (160 mm min.) non-packed portion non-packed portion full travel on starting position boss pwb mounting hole for reference (ese2131bt) view from a pwb land pattern for reference (ese2131at) view from a (5.4) 1.0 3.4 0.1 1.83 4-0.3 1.5 3.8 1.6 1.0 1.0 3.4 0.3 a 4.8 4.5 3.3 2.8 2.1 2.3 0.3 1.20 0.05 c0.1 0.8 (r0.3 ) 0.7 1.2 3.46 1.2 0.7 1.5 0.7 1.2 3.46 1.2 0.7 1.5 1.3 1.4 common terminal common terminal common terminal common terminal 1 1 c c c c dimensions in mm (not to scale) packaging speci? cations standard reel dimensions in mm (not to scale) taping reel embossed carrier taping circuit diagram 1-pole 1-th row (n . o) type a n.o (h=3.8) part numbers boss packaging type c n.o (h=4.8) part numbers boss packaging ese2121at without boss embossed taping (reel pack) ese2131at without boss embossed taping (reel pack) ese2121bt with boss type b n.c (h=3.6) ese2161at without boss ese2131bt with boss ese2161bt with boss no. 1 no. 2 with boss 1-pole 1-throw without boss 1-pole 1-throw 1-pole 1-th row (n . c) hh 0 type a 3.8 mm 3.5 mm type b 3.6 mm 3.3 mm feb. 2008
|
